Breaking in your band saw blade

With proper break-in, tooth edge damage can be avoided.

In the January 2023 issue of Canadian Fabricating & Welding, we outlined seven ways that fabricators can get the most out of their band saw. One of the ways to do that is to properly break in the blade.

Jay Gordon, North American sales manager, saws and hand tools at The L.S. Starrett Co. explains why and how to break in the blade.

In the context of band saw cutting operations, high efficiency and productivity means keeping the saw running, and fabricators are always looking for ways to reduce downtime and extend blade life.

While cost is important, it is the cost per cut that really matters. Extending the life of a blade enables you make more high-quality cuts, increasing the saw’s productivity of the saw, which minimizes the cost per cut.

Blade design plays an important role and choosing the right blade for the application is essential. However, machine maintenance and operating practices can affect the blade’s surface life and the quality of the surface finish.

Following good operating and maintenance practices is important, and one critical step that is all too often skipped is breaking in the blade.

A properly broken-in blade will have a significantly increased tool life. So why skip over this important step?

Some operators feel that breaking in a blade slows down production which is in direct opposition to a shop’s goal of maximizing machine production time. However, the short amount of time that it takes to break in a blade can both increase productivity and cut quality. While it may not seem worth it upfront; it certainly is in the long run.

The band saw blade break-in process varies depending on the characteristics of the material being cut. Here are some general steps to follow:

Pro Tip: As you increase the SFPM, make sure that there are no vibrations, which can reduce cut quality and cause premature blade wear. Slight adjustments to the band speed may need to be made in the event of excess noise and vibration.

Without proper break-in, a tooth’s cutting edge can be damaged, leading to decreased tool life.

While this is a general guide, there are some material-specific instructions to follow.

When working with softer materials like carbon steel and aluminum:

When working with harder materials like INCONEL, hardened steels, tool steels, and stainless steels:

New band saw blades have very sharp edges on the teeth that are prone to chipping and breaking. By gradually increasing the feed pressure during break-in, the sharp tooth edge is evenly honed, creating a very fine radius to the leading edge of the tooth.

Once the teeth are honed and properly broken in, the blade will cut faster, straighter, and last longer than a blade that has not been broken in.

Following a proper break-in process is a simple, easy way to ensure that you’re getting the maximum productivity in your sawing operation.

Jay Gordon is North American sales manager, saws and hand tools at The L.S. Starrett Co., 121 Crescent St., Athol, MA 01331, www.starrett.com.

From left: new blade with sharp tooth; tooth correctly broken in; and tooth incorrectly broken in.