banner

News

Jan 08, 2024

Portable magnetic drill features automatic feed and reverse

CS Unitec's new AutoMAB 350 features an automatic feed mechanism with automatic reverse and shutoff. Operating at 450 RPM, it drills holes up to 1-1/2 in. dia. with annular cutters in structural steel and other metals. Drilling depth is 2-3/8 in. max. with a pilot pin and 4-3/8 in. without a pilot pin.

The drill’s power feed controls drill pressure to maintain optimal RPM and feed rate. An integrated, automatic cooling/lubrication system helps increase the life of the annular cutters by reducing friction and wear.

The drill is equipped with the SAFEMAG™ system, which determines whether the magnet has sufficient adhesive force on the material and alerts the user with LED indicators: green for go, red for stop. The electronic safety shutoff sensor automatically shuts down the drill motor if the magnet loses contact with the material. Additional safety features include simple arrangement of controls for one-handed operation and LED load indicators.

SHARE